Table of Contents
Advertisement
3
RECORD SET
3
Set "ALARM RECORDING AREA" to
49% and turn the shuttle dial to the
right.
The cursor moves to "AREA FULL RESET."
4
Turn the shuttle dial counter- clockwise.
The <WARNING> screen is displayed. The screen
contains a message regarding initialization of the hard
disk.
5
To change the recording area, turn the
jog dial to display "YES".
If the shuttle dial is turned clockwise while "NO" is
selected, the <RECORDING AREA SET> screen will
be displayed and the recording capacities will revert to
their previous settings. In other words, the new settings
will not be adopted.
<RECORDING AREA SET>
TOTAL CAPACITY
:
82GB
NORMAL RECORDING AREA
:
50 %
AREA FULL RESET
->
ALARM RECORDING AREA
:
49 %
AREA FULL RESET
->
ARCHIVE AREA
:
1 %
AREA FULL RESET
->
CAUTION : WHEN THE AREA SETTING IS CHANGED,
THE WHOLE AREA WILL BE INITIALIZED !
<WARNING>
THIS CHANGE WILL INITIALIZE THE DISK.
ALL RECORDING WILL BE ERASED.
ARE YOU SURE ?
NO
CHANGE:JOG
SET:SHUTTLE
<WARNING>
THIS CHANGE WILL INITIALIZE THE DISK.
ALL RECORDING WILL BE ERASED.
ARE YOU SURE ?
YES
CHANGE:JOG
SET:SHUTTLE
6
Turn the shuttle dial clockwise.
(1) The hard disk is initialized.
(2) The <RECORD SET> screen appears and the
modified recording capacities are adopted.
7
Press the [EXIT/OSD] button.
The setting procedure is ended and the display returns to
the normal screen.
EXIT/OSD
Setting overwrite permission
Set whether to continue recording and automatically
overwrite data, or stop recording and not overwrite data
when the normal recording area and alarm recording area
become full (Setting recording conditions ( P.67)). Default
setting is to automatically overwrite.
If the setting to not overwrite is selected, recording stops at
the point where remaining capacity runs out. In this case,
recording can be continued using the following steps to
authorize overwriting.
Also, data is not overwritten automatically to archive area.
Follow the steps below to authorize overwriting each time
data is full.
1
Set the items in "Setting overwriting for
the normal recording area". ( P.67)
Set "OVERWRITE" to "OFF."
66
HDD INITIALIZING !
English
Advertisement
Table of Contents
