Viewing With Automatic Screen Selection; Viewing On The Monitor 2 - Sanyo DSR-3709 Instruction Manual

2 VIEWING VIDEO FROM A CAMERA
Viewing with automatic screen
selection
Setting automatic full screen selection
Use the following procedure when viewing a full screen to
have the displayed video change automatically based on
camera numbers.
1
Press the [SEQUENCE] button.
The SEQUENCE indicator starts to flash and the displayed
video changes automatically based on camera numbers.
01-01-04 00:00:00 REC REPEAT EN A ALARM 0000
04-01-01 00:00:00 REC REPEATENA ALARM 0000
01-01-01 00:00:00 REC REPEATENA ALARM 0000
It is possible to specify the cameras for which automatic
selection is to be carried out. ( P.102)
Canceling automatic selection
2
Either press the [SEQUENCE] button
once again or press the appropriate
[CAMERA SELECT], [QUAD], or [MULTI]
button.
Automatic selection ends and the display returns to the
normal screen.
Setting automatic quad-screen selection
1
Press the [QUAD] button.
The QUAD indicator lights up and the monitor display is
divided in four.
QUAD
English
01
02
15
02-01-01 00:00:00 REC REPEATENA ALARM 0000
16
01 02
03 04
2
Press the [SEQUENCE] button.
The content of the split screen will automatically toggle
between video from cameras No. 1 through No. 4 and
video from cameras No. 5 through No. 8, No. 9 through
No. 12 and No. 13 through No. 16
On the DSR-3709, the video changes automatically in
order of cameras No. 1-4, 5-8, 9-3, etc.
Returning to normal quad-screen display
3
Press the [SEQUENCE] button once again.
Automatic selection ends and normal quad-screen display
returns.
Automatic selection cannot be used with playback
video.

Viewing on the monitor 2

When a monitor 2 is connected to the monitor 2 output
terminal on the digital video recorder's rear panel, this
monitor can be used to view video from a single camera or
to automatically scroll through video from all cameras,
even if the main monitor is currently displaying video in
split-screen format. In addition, it is also possible to display
video on the monitor 2 automatically from any camera for
which an alarm has occurred. By default, automatic full
screen selection is carried out.
Change the monitor 2 setting
1
Press the [MON2] button.
The MON2 indicator lights up.
MON2
[MON2] button
21
01 02
03 04
08
07
11 12
15 16
CARD CARD
MENU
RESET
EJECT