Table of Contents
Advertisement
2
VIEWING VIDEO FROM A CAMERA
Viewing on the monitor 2
When a monitor 2 is connected to the monitor 2 output
terminal on the digital video recorder's rear panel, this
monitor can be used to view video from a single camera or
to automatically scroll through video from all cameras,
even if the main monitor is currently displaying video in
split-screen format. In addition, it is also possible to display
video on the monitor 2 automatically from any camera for
which an alarm has occurred. By default, automatic full
screen selection is carried out.
Change the monitor 2 setting
1
Press the [MON2] button.
The MON2 indicator lights up.
MON2
[MON2] button
Monitor 2 operation is not possible when a menu screen
is being displayed.
Selecting Camera No. 4 for full screen
2
Press the No. 4 [CAMERA SELECT]
button.
The video from Camera No. 4 is displayed in full screen
format on the monitor 2.
Monitor 2
01-01-04
04
English
Main Monitor
00:00:00
02
01
03
04
05
Setting automatic full screen selection
1
Press the [SEQUENCE] button.
The video displayed on the monitor 2 changes
automatically based on camera numbers.
Press the [SEQUENCE] button once again to cancel
automatic selection.
If the monitor 2 is not synchronized with the connected
cameras, vertical picture instability may occur upon the
switching of camera video.
Displaying alarm video in full screen format
1
Set "MON.2 DISPLAY" from <ALARM
OPERATION SET> to "ON". ( P.76)
When an alarm occurs, the corresponding video is
displayed in full screen format on the monitor 2.
Ending the monitor 2 setting procedure
1
Press the [MON2] button.
The MON2 indicator turns off.
MON2
06
Playback video cannot be viewed on the monitor 2.
19
Monitor 2
Main Monitor
01-01-04
00:00:00
01
04
04
01-01-04
00:00:00
01-01-04
00:00:00
02
02
03
05
06
Advertisement
Table of Contents
