Table of Contents
Advertisement
6
DVR VIEWER
(when optional interface board is installed)
The DVR Viewer is a program designed specifically for
DVRs of all series. It can be used to play back image and
sound data that has been copied onto media such as
computer hard disk drives, CompactFlash cards and CD-Rs.
Version 1.4.7 of this application can be installed from the
CD-ROM supplied with this digital video recorder. In
addition, DVR Viewer may also be downloaded from the
Sanyo website.
Sanyo website URL: http://www.sanyosecurity.com
When playing back sound data, you will need Version
1.4.7 or later. In the case of data that has been copied
to a CD-R, only the images can be played back.
Operating environment
The following operating environment is required in order to
use the DVR Viewer.
Applicable operating system: Windows 98, 98SE, Me,
2000, XP
Applicable computer: PC/AT compatible computer
running one of the above operating systems
When playing back images that include sound, you will
need to have the plug-in "Active Allinstall 1.1.0" pre-
installed on the system. ( P. 91)
Installing the DVR Viewer
Install the DVR Viewer by the following procedure.
1
Starting the installation wizard
Double-click the icon for the downloaded "Setup.exe" file
to start the installation wizard.
2
Selecting the language settings
Select the display language for the software (English) in
the [Choose Setup Language] window and then click [OK].
English
3
Starting the installation
Click [Next>] in the [Welcome to the InstallShield Wizard
for DVR Viewer] window to start the installation process.
4
Choosing the destination location
Check that the destination folder shown in the [Choose
Destination Location] window is correct, and then click
[Next>].
If you would like to change the folder, click [Browse...] and
specify the desired folder.
5
Starting copying of files
Check that all the settings shown are correct, and then
click [Next>]. Copying of files will then start. If you would
like to change any of the settings, click [<Back].
6
Completion of installation
When the installation is complete, the [Maintenance
Complete] window appears. Click [Finish].
125
Advertisement
Table of Contents
