General Set; General Settings; Setting Data Display; Other - Sanyo DSR-3709 Instruction Manual

4

GENERAL SET

Main menu
<MAIN MENU>
1.INITIAL SET ->
2.RECORD SET ->
3.GENERAL SET ->
4.SCREEN SET ->
5.POWER LOSS/USED TIME ->
6.INITIALIZATION LOG ->
7.COPY MENU SETTINGS ->
MOVE:JOG SELECT:SHUTTLE

General settings

The <GENERAL SET> is used to make the following
settings.
Setting
<DISPLAY SET>
<DISPLAY SET> Switches display items such
DATE : ON
TIME : ON as date and time from the
QUALITY : ON
1 AUDIO : ON operation display area.
ALARM COUNT : ON
ALARM TYPE : ON
Settings can also be made
TITLE : ON
for situations where video
VIDEO LOSS : ON
signals are lost.
<BUZZER SET>
ALARM : OFF
DISK FULL : ON
DISK ERROR : ON <BUZZER SET>
2 LOCK WARNING : ON
KEY IN : OFF Turns the buzzer on or off.
NON REC : OFF
<SECURITY LOCK SET>
<SECURITY LOCK SET>
LEVEL PASSWORD(4-8) USE
Lets you set passwords to
ADMIN -------- OFF
USER -------- OFF
3 prevent unauthorized users
REC CONTROL : ADMIN
CAMERA CONTROL : ADMIN
from operating the digital
video recorder.
<HDD SET>
<HDD SET>
Allows confirmation of hard
DISK1 : 82GB
DISK2 : ---GB
disk capacity and performs
DISK INITIALIZE ->
4 CAUTION : ALL RECORDING WILL BE ERASED!
initialization.
MIRRORING : OFF Settings can also be made
PLAYBACK DRIVE : ***
CAUTION : RECORDING SPEED WILL BE for mirroring.
LIMITED BY MIRRORING!
<NETWORK SET>
<NETWORK SET>
NETWORK CONTROL : OFF
NETWORK STATUS : ON
Allows the digital video
IP ADDRESS : 192.168. 0. 1
5 SUBNET MASK : 255.255.255. 0
GATEWAY : 0. 0. 0. 0
recorder to be connected to a
PORT : 00080
ID : PASSWORD (4-8)
PC via a network.
ID1 : 1111----
ID2 : 2222----
ID3 : 3333----
[MENU] button
<GENERAL SET>
1.DISPLAY SET ->
2.BUZZER SET ->
3.SECURITY LOCK SET ->
4.HDD SET ->
5.NETWORK SET ->
6.RS-485 SET ->
7.CAMERA CONTROL SET ->
MOVE:JOG SELECT:SHUTTLE
Description Ref.
P.86
P.88
P.89
P.92
P.93
86
[EXIT/OSD] button
Shuttle dial
Setting
<RS-485 SET>
<RS-485 SET>
DATA SPEED : 19200
STATUS INFO : ON
6 ALARM INFO : ON Lets you make settings when
ADDRESS : 000
using RS-485.
<CAMERA CONTROL SET>
<CAMERA CONTROL SET>
CH PROTOCOL ADD. | CH PROTOCOL ADD.
01 OFF --- | 09 OFF ---
02 OFF --- | 10 OFF --- Set when cameras with
7 03 OFF --- | 11 OFF ---
04 OFF --- | 12 OFF --- remote operation capability
05 OFF --- | 13 OFF ---
06 OFF --- | 14 OFF --- are connected.
07 OFF --- | 15 OFF ---
08 OFF --- | 16 OFF ---

Setting data display

Use the following procedure to remove the date, time, or
other information from the operation display area. All items
are set to "ON" by default. Where necessary, the required
items can be turned off.
1
Press the [MENU] button and turn the
jog dial to select "3. GENERAL SET",
and then turn the shuttle dial clockwise.
The <GENERAL SET> screen is displayed.
MENU
CARD CARD
Jog dial
MENU
RESET
EJECT
Description Ref.
P.96
P.97
English