Adding A New Remote/Local User - HIKVISION DS-7300HWI-SH Series User Manual

1. Click to pop up the Edit User menu, as shown in Figure 58.
2. Enter the old password in the Old Password textbox.
3. Check the Change Password checkbox.
4. Enter the new password in the Password textbox.
5. You can also enter the User's MAC Address of the remote PC. If it is configured and enabled, it
only allows the remote user with this MAC address to access the device.
6. Click the OK button to save the setting and back to the up level.

Adding a New Remote/Local User

You may add up to 31 new users to your DVR.
To add new users:
1. On the User tab shown in Figure 57, click Add to enter Add User interface, as shown in Figure 59.
2. Enter the information for new user, including User Name, Password, Level and User's MAC
Address.
Figure 58 Edit User Menu
Figure 59 Add User Menu
61