Managing User Accounts; Changing Password - HIKVISION DS-7300HWI-SH Series User Manual


Enter the IP address of the remote PC on which the CMS Software is installed in.

Enter the alarm monitoring port in Alarm Host Port, which must be the same as the port
configured in the software.
2. Port:

Server Port: Enter the Server Port which designates the port to be used with the client
software.

HTTP Port: Enter the HTTP Port which refers to the one to be used with the built-in Web
Server.

Multicast IP: Enter the Multicast IP to enable multicast.

RTSP Port: Enter the PTSP Port. PTSP is a network control protocol designed for use in
entertainment and communication systems to control streaming media servers.

HTTPS Port: Check the Enable HTTPS checkbox and enter the HTTPS Port. HTTPS is used
for secure communication over network.
3. Click Apply to save the network settings and click
without clicking Apply will quit out of the menu without saving settings.

Managing User Accounts

By default, your DVR comes with one user account, the Administrator account. The Administrator user
name is admin and the password is 12345. The default password for Administrator should be changed
right away for security reasons. The Administrator has the authority to add, delete or configure
parameters for many of the system functions.

Changing Password

You can change the default password by going to Menu > System Configuration > User, as shown in
Figure 57.
To change the password:
Figure 57 User Settings Menu
to return to the previous menu. Click
60