Managing User Accounts; Adding A New Remote/Local User - HIKVISION DS-7300HFI-ST Series User Manual

User's Manual of DS-7300HFI-ST Series DVR
9. Select the Save button to save the network settings and select Exit to return to the previous menu.
Selecting the Exit button without clicking Save will quit out of the menu without saving settings.

Managing User Accounts

By default, your DVR comes with two user accounts, the Administrator account and the Guest accounts.
The Administrator user name is admin and the password is 12345. The default password for
Administrator should be changed right away for security reasons. The Administrator has the authority to
add, delete or configure parameters for many of the system functions. The Guest accounts user name is
guest without password. You can easily switch between accounts by click
the main menu.

Adding a New Remote/Local User

You may add up to 31 new users to your DVR.
To add new users:
1. Enter the User Settings menu, shown in Figure 42 by going to Main Menu > System
Configuration > User Settings.
2. Under Users List, click on Select this entry to add new user.
3. Once a new entry has been selected, the fields under Users will become editable. Enter the
information for Name, Password and Verify.
Figure 41 Test Connection Confirmation
Figure 42 User Settings Menu
at the lower left corner of
54