Adding A New Remote/Local User - HIKVISION DS-7604NI-E1 User Manual

DS-7600 Series NVR User's Manual
1. Click to pop up the Edit User menu, as shown in Figure 53.
2. Enter the old password in the Old Password textbox.
3. Check the Change Password checkbox.
4. Enter the new password in the Password textbox.
5. You can enter the User's MAC Address of the remote PC. If it is configured and enabled, it only
allows the remote user with this MAC address to access the device.
6. You can also enter the User's IP Address of the remote PC. If it is configured and enabled, it only
allows the remote user with this IP address to access the device.
7. Click the OK button to save the setting and back to the up level.

Adding a New Remote/Local User

You may add up to 31 new users to your NVR.
To add new users:
1. On the User interface shown in Figure 53, click Add to enter Add User interface, as shown in
Figure 54.
2. Enter the information for new user, including User Name, Password, Level and User's MAC and
IP Address.
Figure 51 Edit User Menu
Figure 52 Add User Menu
65