Backing up Video Clips
Video clips can be backed up to various devices, such as USB flash drives, USB HDDs or a DVD writer.
Selecting Video Clips
Video clips can be selected for backup in the Playback Interface using the controls found in the Mark Clip
For Export panel, shown in Figure 45.
The controls found in the Mark Clip For Export panel include:
Start/Stop Button: Mark the starting/ending point for the video clip. When you click the
Start, it will turn to the Stop button.
Play Button: Play the selected video clip.
Save Button: Save the selected video clip to the HDD.
Clear Button: Clear the selected video clip.
To select video clips in the Playback Interface:
1. Enter the Playback Interface, shown in Figure 46 by going to Menu > Playback > Record.
2. Search for the recorded files that you would like to select video clips from (See Searching for
Recorded Files on Page 45). Video clips can only be selected in single playback mode.
3. Select the starting position of the video clip by clicking the desired location on the blue
recordings bar.
Figure 45 Mark Clip For Export Controls
Figure 46 Playback Menu
51