Managing User Accounts; Adding A New Remote/Local User - HIKVISION DS-7200HVI-ST Series User Manual

Select the Save button to save the network settings and select Exit to return tothe previous menu. Selecting the
9.
Exit button without clicking Save will quitout of the menu without saving settings.
7.1.2 Extended remote connection
Extended remote connection is used for adding more network visitors with sub stream. Check "Extended remote
connection" to enable this function.
7204HVI‐ST support up to 24 network visitors, six for each channel.
7208HVI‐ST support up to 48 network visitors.
7216HVI‐ST support up to 50 networks visitors.
If you don't enable this function, then 7208HVI‐ST/7216HVI‐ST only support up to 24 network visitors.
You have no need of checking "Extended remote connection" when it is 7204HVI‐ST.
.
7.2 Managing User Accounts
By default, DVR comes with two user accounts, the Administrator account and the Guest accounts. TheAdministrator user
name is admin and the password is 12345. The default password forAdministrator should be changed right away for
security reasons. The Administrator hasthe authority to add, delete or configure parameters for many of the system
functions. The Guest accounts user name is guest without password. You can easily switch between accounts by click
Login/Logout at the lower left corner of the main menu.
7.2.1 Adding a New Remote/Local User
You may add up to 30 new users to your DVR.
To add new users:
Enter the User Settings menu, shown in Figure 40 by going to MainMenu > System Configuration > User Settings.
1.
Figure 39. Test Connection Confirmation
38