Configuring Network Settings
Network settings must be configured before you're able to use your DVR over the network.
Configuring General Settings
To configure network general settings:
Enter the Network Configuration menu, shown in Figure 51 by going to Menu > System
1.
Configuration > Network
2. Select the General tab. The current network settings are displayed on the right side of the menu,
shown in Figure 52.
3. If you have a DHCP server running and would like your DVR to automatically obtain an IP
address and other network settings from that server, check the DHCP checkbox.
.
Figure 51 Network Settings Menu
Figure 52 Network Settings Menu
56