Setting Date & Time - HIKVISION DS-7300HWI-SH Series User Manual

Setting Date & Time
It is extremely important to setup the system date and time to accurately timestamp recordings and events.
To setup date and time as following steps:
Steps:
1. Enter the System Configuration menu by going to Menu > System Configuration > General.
2. Select the Time/Date tab, as shown in Figure 10.
3. The current system time and date as well as the time zone will be displayed. Using the directional
buttons on the front panel/remote or the mouse, select the correct date, time and time zone.
4. To enable Daylight Savings Time, click and check the Enable DST checkbox and there will pop-
up the DST Setting menu, as shown in Figure 11. You can check the Auto DST Adjusting
checkbox or manually check the date of the DST period and click the Apply button to confirm the
setting. Click the OK button to return to the up level menu.
Figure 9 System Configuration Menu
Figure 10 DST Settings Menu
20