Local Configuration:
Local Log Search: Searching and viewing logs and system information of DVR.
Local Parameters Settings: Configuring parameters, restoring factory default parameters and
importing/exporting configuration files.
Local Camera Management: Enabling and disabling analog camera(s). Adding, deleting and
editing of network camera(s).
Local Advanced Operation: Operating HDD management upgrading system firmware,
clearing I/O alarm output.
Local Shutdown/Reboot: Shutting down or rebooting the DVR.
Remote Configuration:
Remote Log Search: Remotely viewing logs that are saved on the DVR.
Remote Parameters Settings: Remotely configuring parameters, restoring factory default
parameters and importing/exporting configuration files.
Remote Camera Management: Remotely enabling and disabling analog camera(s), and
adding, deleting and editing of network camera(s).
Remote Serial Port Control: Configuring settings for RS-232 and RS-485 ports.
Remote Video Output Control: Sending remote button control signal.
Two-Way Audio: Realizing two-way radio between the remote client and the DVR.
Remote Alarm Control: Remotely arming (notify alarm and exception message to the remote
client) and controlling the alarm output.
Remote Advanced Operation: Remotely operating HDD management upgrading system
firmware, clearing I/O alarm output.
Remote Shutdown/Reboot: Remotely shutting down or rebooting the DVR.
Camera Configuration:
Local Video Export: Locally exporting recorded files of the selected camera (s).
Local Playback: Locally playing back recorded files of the selected camera (s).
Local PTZ Control: Locally controlling PTZ movement of the selected camera (s).
Local Manual Operation: Local manual operation of the selected camera (s).
Remote Live View: Remotely viewing live video of the selected camera (s).
Remote Playback: Remotely playing back recorded files of the selected camera (s).
Remote PTZ Control: Remotely controlling PTZ movement of the selected camera (s).
Remote Manual Operation: Remotely manual operation of the selected camera (s).
4. Click the Apply button to save the parameters.
Note:
If you forget the password to your DVR, contact your supplier with the serial number of your DVR to
obtain a secure code to reset your DVR.
Note:
User settings only appear on the list of System Configuration when login with Administrator accounts.
Deleting a User
To delete a user from the DVR:
1. Enter the User menu, shown in Figure 67 by going to Menu > System Configuration > User.
2.
Select a user and click
3. Click the Yes button to confirm the deletion of user or click the No button to cancel.
to delete.
63