HIKVISION DS-7300HWI-SH Series User Manual page 14

•
REC/SHOT Button: The REC/SHOT button is used to enter the Quick Schedule Recording
interface. If used when controlling a PTZ, pressing the REC/SHOT button and then a
Numeric button will call a PTZ preset.
•
PLAY/AUTO Button: The PLAY/AUTO button is used to enter the Playback menu. It is
also used to turn audio on/off in the Playback menu and auto scan in the PTZ Control menu.
•
ZOOM+ Button: The ZOOM+ button is used to zoom the PTZ camera in when in the PTZ
Control menu.
•
A/FOCUS+ Button: The A/FOCUS+ button is used to adjust focus in the PTZ Control
menu. It is also used to switch between input methods (upper and lowercase alphabet,
symbols and numeric input). It can also be used to clear entire masked areas, such as in the
Motion Detection and Privacy Mask menus.
•
EDIT/IRIS+ Button: The EDIT/IRIS+ button is used to edit text fields. When editing text
fields, it will also function as a Backspace button to delete the character in front of the cursor.
On checkbox fields, pressing the EDIT/IRIS+ button will tick the checkbox. In PTZ Control
mode, the EDIT/IRIS+ button opens up the iris of the camera. In Playback mode, it can be
used to generate video clips for backup.
•
MENU/WIPER Button: Pressing the MENU/WIPER button will return the user to the Main
menu (after successful login). Pressing and holding the button for 5 seconds will turn off
audible key beep. The MENU/WIPER button will also bring up Sensitivity Interface settings.
In PTZ Control mode, the MENU/WIPER button will start wiper (if applicable).
•
F1/LIGHT Button: The F1/LIGHT button when used in a list field will select all items on
the list. In PTZ Control mode, it will turn on/off PTZ light.
•
F2/AUX Button: The F2/AUX button is used to cycle through tab pages. It will also bring up
the Channel & OSD Position settings.
•
MAIN/SPOT/ZOOM- Button: The MAIN/SPOT/ZOOM- button is used to switch to the
control of spot output. In PTZ Control mode, it can be used to zoom the camera out.
•
PREV/FOCUS- Button: The PREV/FOCUS- button is used to switch between single screen
and multi-screen mode. In PTZ Control mode, it is used to adjust the focus in conjunction
with the A/FOCUS+ button. It can also be used to select entire masked areas, such as in
Motion Detection and Privacy Mask menus.
Direction/Enter Buttons:
8.
•
Direction Buttons: The Direction buttons are used to navigate between different fields and
items in menus. In playback mode, the Up and Down button is used to fast-forward and
rewind recorded video. The left and Right button will select the next and previous day of or
pause the video. In Single Play mode, pressing the Enter button will advance the video by a
single frame.
•
Enter Button: The Enter button is used to confirm selection in any of the menu modes. It can
be used to tick checkbox fields. In Playback mode, it can be used to play or pause the video.
In Single Play mode, pressing the Enter button will advance the video by a single frame.
Jog Shuttle Control:
9.
the playback mode, the outer ring is used to speed up/slow down the video. The inner ring can be
used to jump 30 seconds forward/backward in a video. In Preview mode, it can be used to cycle
through different channels.
The Jog Shuttle control can be used to move the active selection in a menu. In
13