Channel-Zero Encoding - HIKVISION DS-7300HWI-SH Series User Manual

6. Click to start live view of all channels and click
or to go to the previous or next page. For example, in 2x2 screen configuration mode,
pressing the Next button will bring up the next set of 4 displays.
7. Click the Apply button to save settings.
8. Click to exit out of the menu.

Channel-Zero Encoding

Channel-Zero Encoding can be chosen to decrease the bandwidth requirement without affecting the image
quality when you need to get a remote view of many channels in real time from web browser or remote
client. To setup channel-zero encoding as following steps:
Steps:
1. Enter the Live View menu by going to Menu > System Configuration > Live View
2. Select the Channel-Zero Encoding tab, as shown in Figure 28.
3. Check the checkbox to enable channel-zero encoding.
4. Set the Frame Rate, Max. Bitrate Mode and Max. Bitrate.
After you set the channel-zero encoding, you can get a view in the remote client or IE browser of all the
channels in one screen.
Figure 28 Channel-Zero Encoding Menu
to stop live view all channels. Click
35