Checking The Status Of Your Dvr - HIKVISION DS-7300HWI-SH Series User Manual

5. To acquire the time and date over an NTP (Network Time Protocol) Server, check the Enable
NTP checkbox. You can set the interval and enter your own NTP server.
6. Click the Apply button to save the settings and click
without clicking the Apply button will exit the menu without saving.

Checking the Status of Your DVR

The current status of your DVR can be checked at anytime by going to the System Information menu. The
System Information menu, as shown in Figure 12, can be accessed by going to Menu > System
Information.
1. Select the Device Info tab to enter the Device Information menu to view the device name, model,
serial No., firmware version and encode version, as shown in Figure 12.
2. Select the Camera tab to enter the Camera Information menu to view the status of each camera, as
shown in Figure 13.
Figure 11 System Information Menu
to exit out of the menu. Clicking
21