HIKVISION DS-7300HWI-SH Series User Manual page 81

2. Select the camera to setup video loss detection in using the camera dropdown list.
3. Click Enable Video Loss Detection.
4. Press the Handing Set button to set up handing method.
1) Select the Arming Schedule tab to set the arming schedule. Up to 8 periods can be
configured. If the same schedule can be applied in other channel, click Copy.
2) Select the Handing tab to set the actions to take if tamper-proof is detected.
5. Click the Apply button to save the settings. Click OK to back to the previous menu.
6. If the same settings can be applied in other channels, click Copy to copy the same configuration
to other channels.
7. Click Apply to save the settings.
Figure 79 Video Loss Detection Menu
80