Configuring Live Feed Displays - HIKVISION DS-7300HWI-SH Series User Manual

Start/Stop Auto-Switch: Click to start/ stop auto-switch. Auto-switch will cycle through selected
cameras. Switching of camera can be based on an individual or multiple cameras.
Start Recording: Click the Continues Record/Event Record item. This will bring up an attention box
shown below. If you click yes, it will start all-day continues/event recording of all channels.
Note:
1. Before you start Auto-switch, you should set Dwell Time in Live View setting menu by going to
Menu > System Configuration > Live View > General.
2. After 20 seconds of inactivity, the DVR will automatically exit out of the Display menu and go
back into the Live Feed mode.
3. The auto lock menu setting is selected by default, meaning the Admin password must be enter to
exit out of the Live Feed into the Main Menu.

Configuring Live Feed Displays

Live Feed displays can be customized to your own needs.
To customize display settings:
1. Set language, CVBS output standard, resolution and so on by going to Menu > System
Configuration > General > Display, as shown in Figure 24.
The settings available to configure in this menu include:
Figure 24 Display Menu
32