Configuring Tamper-Proof - HIKVISION DS-7300HWI-SH Series User Manual

2. Select the camera to setup privacy mask in using the camera dropdown list on the upper left of the
menu.
3. Check the Enable Privacy Mask checkbox to enable privacy mask.
4. Up to four privacy masks can be used per camera and are shown using four different colors,
yellow, green, blue and grey. Using the mouse, click and drag out rectangular boxes defining the
desired zones.
5. You may clear a privacy zone at any time by clicking on the corresponding Clear Zone button or
Clear All button to clear all zones.
6. If the same settings can be applied to other channels, click Copy.
7. Select the Apply button to save the privacy mask settings and select
previous menu. Selecting
settings.

Configuring Tamper-proof

Tamper-proof detection can be used to recognize if an area of a camera is purposely covered and to
respond accordingly.
To configure tamper-proof detection:
1. Enter the Tamper-proof menu, shown in Figure 78 by going to Menu > Cameras Setup > Tamper-
proof.
Figure 77 Privacy Mask Settings Menu
without clicking Apply will quit out of the menu without saving
.
to return to the
78