Language: The default language used is English.
CVBS Output Standard: Select the output standard to NTSC or PAL, which must be the
same with the video input standard.
Resolution: Select the appropriate resolution of VGA/HDMI output.
Mouse Pointer Speed: Set the speed of mouse pointer and 4 levels are configurable.
Enable Wizard: Select the Enable Wizard to enable start wizard, it will help user to set the
DVR.
Enable ID Authentication: Select to enable ID authentication when operate the DVR.
2. Set device name, device no., CVBS output brightness, auto lock time and menu output mode by
going to Menu > System Configuration > General > More Settings, as shown in Figure 25.
The settings available to configure in this menu include:
Device Name: Edit the name of the device.
Device No.: Edit the number of the device.
CVBS Output Brightness: Adjust the video output brightness.
Auto Locktime: Set the auto lock time of menu.
Menu Output Mode: select the menu output mode from Auto, HDMI, VGA and Main
CVBS.
3. Set the live view interface parameters and event output by going to Menu > System
Configuration > Live View > General, as shown in Figure 26.
The settings available to configure for each video output include:
Video Output Interface: Designates the output including Main CVBS, HDMI, VGA, and
Figure 25 More Settings Menu
Figure 26 Live View Menu
33