Dial-Out Phone Numbers; Access Codes - DKS 1812 Owner's Manual

4.1.3 Dial-Out Phone Numbers

To use the dial-out phone number feature, the guest simply presses a two-digit directory code (24-50)
on the system keypad. The 1812 will automatically dial out the phone number programmed under the
directory code that was entered on the keypad (section 2.5.1). Once the call is answered, the person
called may grant access by pressing the programmed tone open number or they can press the hang
up number (2.4.10) to disconnect the call without granting access.
4.1.4

Access Codes

The simple access codes (five-digit entry code on the 1812 keypad) will operate either relay 1 or relay
2 depending on which relay they have been programmed to activate (2.6.1).
Keypad device access codes will operate the relay that they have been programmed to operate
(2.6.2).
To use a keypad access code:
1. Press # then enter the access code [# _ _ _ _ _ (beeeeeep)]
When the access code is entered on the keypad, the system will check its memory to see if the code
is programmed and will also check any time zone restrictions that may have been programmed for
the specific code that was entered.
If the access code is a temporary code, the system will check the clock/calendar to determine if the
current day falls within the programmed temporary access code boundaries (section 2.6.5).
Page 50 1812-162-B-6-09