Section 3 - Adjustments; Speaker Volume And Microphone Gain - DKS 1812 Owner's Manual

Speaker Volume
The speaker volume potentiometer is labeled SPEAKER VOL on the control board. The speaker
volume should be adjusted for adequate sound. Adjusting the speaker volume too loud could cause
feedback from the microphone.
1. Open the front of the telephone entry system and locate the speaker volume adjustment.
2. Push the "Push To Call" button to place a call to the resident. While they are talking, adjust
the speaker volume potentiometer for adequate sound. To increase the volume rotate the
potentiometer clockwise, to decrease the volume rotate the potentiometer counter clockwise.
Microphone Gain
The microphone gain potentiometer is labeled MIC VOL on the control board. This adjustment
increases or decreases the loudness in the telephone handset in the house.
1. Open the front of the telephone entry system and locate the Mic Vol adjustment.
2. Push the "Push To Call" button to place a call to the resident. After they answer, adjust the
microphone gain and ask the resident to let you know when the loudness in their telephone
handset is set to a comfortable level.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
1812-162-B-6-09
SECTION 3 – ADJUSTMENTS
1
2
3
BAD DNS
4
5
6
7
8
RS-485 RX
LAN DOWN
ON
SW1 MODEM / TCP ENB
Phone Line
In Use
Keypad
1 2 3 4 5 6 7 8 9 1011
Master Code
LED
Master
Code
Master Code
Push Button
Microphone
Gain Adjust
Mic
Vol
Speaker
Volume
Adjust
Speaker
Vol
Page 47