Call Forward Phone Number Programming; Do Not Disturb Schedule - DKS 1812 Owner's Manual

2.7.3 Call Forward Phone Number Programming

These steps program the call forwarding telephone number into the 1812 memory. Call forwarding
can only be used when the 1812 is programmed in phone mode (see 2.4.1).
1. Press * 1 0 and enter the MASTER CODE. [ * 1 0 _ _ _ _ (beep)]
2. Enter the phone number where calls from the 1812 are to be forwarded to (up to 20 digits)
then press *. [ _ _ _ _ _ _ _ _ _ _ _ * (beep)]
3. Press 0# TOGETHER to end. [0# (beeeeeep)]

2.7.4 Do Not Disturb Schedule

Default setting in step 2 is 0 (DND Off).
The Do Not Disturb (DND) feature allows the resident to program a schedule when they do not want
the 1812 to ring the house phones or to call forward when the call button on the unit is pressed. For
example, a resident may program a do not disturb schedule from 10 PM to 7 AM on certain days of
the week, or all seven days. Once the DND schedule has been programmed, it can be turned on or
off as needed.
1. Press * 3 4 and enter the MASTER CODE. [ * 3 4 _ _ _ _ (beep)]
2. Press 0 * to turn DND OFF, OR press 1 * to turn DND ON. [ _ * (beep)]
You can terminate here (step 8) if you have previously programmed the DND schedule and
only ON / OFF is desired.
3. Enter the begin time hour (01-12) and minutes (01-59) then press *. [ _ _ _ _ * (beep)]
4. Press 0 * for AM, OR press 1 * for PM. [ _ * (beep)]
5. Enter the end time hour (01-12) and minutes (01-59) then press *. [ _ _ _ _ * (beep)]
6. Press 0 * for AM, OR press 1 * for PM. [ _ * (beep)]
7. Enter the days of the week that the DND schedule is to be active then press *.
[ _ _ _ _ _ _ _ * (beep)]
Sun = 1, Mon = 2, Tue = 3, Wed = 4, Thu = 5, Fri = 6, Sat = 7.
You can enter up to 7 numbers here (1-7). For example, for the DND to be active only on
Saturdays and Sundays, enter 1 7. The order of the numbers is not important; 17 is the
same as 71.
8. Press 0# TOGETHER to end. [0# (beeeeeep)]
1812-162-B-6-09 Page 43