Table of Contents
Advertisement
Port Configuration
Serial Port Configurations include configuration for the serial parameters, serial communication
modes, data packing options, and event notifications.
Go to the port of the device in Configuration tree.
Choose "Apply Only" or "Apply and Save" to validate the changes.
Serial Settings
The available serial settings for JetPort is as follows:
Port Alias: Remark the port to hint the connected device.
Baud rate: from 110bps to 460.8kbps
Parity: No, Even, Odd, Mark, Space
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 2 (1.5)
* 1.5 is only active when data bit is 5.
Flow Control: No, XON/XOFF, RTS/CTS, DTR/DSR
Interface: RS232
Performance: Throughput, Latency
Throughput mode guarantees highest transmission speed
Latency mode guarantees shortest response time
Advanced Data Packing Options
For advanced data packing options, you can specify delimiters for Serial to Ethernet and / or
Ethernet to Serial communications.
You can define max. 4 delimiters (00~FF, HEX) for each way. The data will be hold until the
delimiters are received or the optional "Flush Ethernet to Serial data buffer" times out. Zero
means disable(factory default).
Force TX interval time is to specify the timeout when no data has been transmitted. When the
timeout is reached or TX buffer is full (4K Bytes), the queued data will be sent. Zero means
disable(factory default).
3-8
JetPort Serial Device Server User's Manual
Advertisement
Table of Contents
