Calibrating The Computer Display - RADVision SCOPIA XT100 Series User Manual

Calibrating the Computer Display

Configure the computer display to one of the supported picture resolutions and refresh
frequencies.
Procedure
Step 1
Right-click on your computer desktop. The Display Properties page appears.
Step 2
Select Settings.
Step 3
Select one of the relevant resolution and refresh frequencies.
Table 3-1
DVI-I
VGA
SVGA
XGA
WXGA
SXGA
WSGA
UXGA
WUXGA
Note:
If you connect a camera to the DVI-I input, the system will manage it as PC content.
Sharing Content before a Call Starts
Before the call starts, you can share the content of your computer screen with other participants
in the local conference room. This mode is called local presentation.
You must setup your computer and the Codec Unit before starting the presentation:
RADVISION | User Guide for SCOPIA XT1000 Series Version 2.0
Resolution and Refresh Frequencies
Resolution
640 x 480
800 x 600
1024 x 768
1280 x 768
1280 x 1024
1440 x 900
1600 x 1200
1920 x 1200
•
Configure your computer to the resolution and refresh rates supported by the system. See
Calibrating the Computer Display page 30
•
Check the audio settings.
To hear the PC input locally and remotely, you need to route PC audio through the S/PDIF
port.
Navigate to Administrator settings > I/O connections > Audio - Inputs > SPDIF/HD page.
Select SPDIF associated with DVI or SPDIF always.
Navigate to Administrator settings > I/O connections > Audio - Outputs > General page. In
the SPDIF/HD camera to output field, select All or HD1+SPDIF.
Refresh Frequency (Hz)
60, 72, 75, 85
56, 60, 72, 75, 85
60, 70, 72, 75, 85
60, 75
60, 67, 70, 72, 75, 76, 85
60
60
60
for detailed information.
'Managing Calls' | 30