Figure H-2 Adding A Cluster Definition - IBM Hub/Switch Installation Manual

Appendix G High Availability
G.4.3.2 Define the two nodes in the cluster
Now tell the HACMP the names of the nodes in the cluster. These names do not have to be the same
as the hostnames or adapters of the nodes since the names are used internally to HACMP.
% smitty hacmp
Cluster Configuration
-> Cluster Topology
550
-> Add a Cluster Definition
Figure H-2 Adding a Cluster Definition
-> Configure Nodes
-> Add Cluster Nodes
September 2002 HPSS Installation Guide
Release 4.5, Revision 2