Aix Infrastructure Un-Configuration Example - IBM Hub/Switch Installation Manual

<mkhpss>
<mkhpss> Prompt ==>
<mkhpss>
<mkhpss>
<mkhpss>
<mkhpss>
<mkhpss>
<mkhpss>
<mkhpss>
<mkhpss>
<mkhpss>
<mkhpss>
<mkhpss> Reply ===> (Select Option [1-7, E, U, X]): 7
<mkhpss>
<mkhpss>
<mkhpss> Status ==> User root; verified; continue...
<mkhpss> Prompt ==> Do you wish to start SSM servers under user id root?
<mkhpss> Reply ===> (Y)
<mkhpss> Prompt ==> Do you wish to start SSM session under default user id? (hpss)
<mkhpss> Reply ===> (Y)
<mkhpss> Prompt ==> Enter SAM2_DISPLAY for displaying SSM session: hpss:0.0
...
E.2 AIX Infrastructure Un-Configuration Example
<mkhpss>
<mkhpss> Prompt ==>
<mkhpss>
<mkhpss>
<mkhpss>
<mkhpss>
HPSS Installation Guide
Release 4.5, Revision 2
Appendix E
Infrastructure Configuration Menu
=================================
Select Infrastructure Configuration Option:
[1] Configure HPSS with DCE
[2] Configure SFS Server
[3] Create and Manage SFS Files
[4] Set Up FTP Daemon
[5] Set Up Startup Daemon
[6] Add SSM Administrative User
[7] Start SSM Servers/User Session
[E] Re-run hpss_env()
[U] Un-configure HPSS
[X] Exit
Start SSM Session
=================
Verify User ID
==============
Infrastructure Configuration Menu
=================================
Select Infrastructure Configuration Option:
[1] Configure HPSS with DCE
[2] Configure SFS Server
[3] Create and Manage SFS Files
[4] Set Up FTP Daemon
September 2002
Infrastructure Configuration Example
509