Table of Contents
Advertisement
Chapter 6
HPSS Configuration
To use a Gatekeeper Server for Gatekeeping Services then the Gatekeeper Server must also be
configured into the Storage Subsystem (see Section 6.4: Storage Subsystems Configuration on page
259).
To use the Gatekeeper Server for Account Validation Services, then the Account Validation button
of the Accounting Policy must be ON (see Section 6.6.3: Configure the Accounting Policy on page 289).
6.8.3.1
Gatekeeper Configuration Variables
Table 6-18: Gatekeeper Configuration Fields on page 332 lists the fields on the Gatekeeper Server
Configuration window and provides specific recommendations for configuring the GK for use by
HPSS.
Display
Field
Description
Name
Server
The descriptive name of the GK.
Name
This name is copied from the GK
general configuration entry.
Server ID
The UUID of the GK. This ID is
copied over from the GK general
configuration entry.
332
Figure 6-22 Gatekeeper Server Configuration window
Table 6-18 Gatekeeper Configuration Fields
September 2002
Acceptable Values
This field cannot be
modified. It is displayed
for reference only.
This field cannot be
modified. It is displayed
for reference only.
Default Value
The selected GK
descriptive name.
Extracted from the
GK general
configuration
entry.
HPSS Installation Guide
Release 4.5, Revision 2
Advertisement
Table of Contents
