These graphs are available at no additional charge providing the system is under warranty or the system is covered under an IBM Hardware Maintenance Agreement. PM for Power Systems graphs are at the partition level, not at the total system level (unless there is no partitioning on the system).
The Full Function detailed reports available from PM for Power Systems are packaged differently by country. Contact your local IBM Representative or an IBM Business Partner for more information. PM for Power Systems graphs are at the partition level, not at the total system level (unless there is no partitioning on the system).
IBM Global Technology Services Interactive graphing Detailed reports are available on most graphs with the full function option of PM for Power Systems (and on the Management Summary graph which is entitled with the no additional charge offering). ...
It is likely that your system experienced a degradation of throughput some day during the period, if this percentage is high during a longer period. • The red line shows the interactive limit that is defined in your system, set by the interactive feature installed, the IBM i software Edition or set by the partition definition.
12 months of utilization. PM for Power Systems will depict the IBM i workload growth over time in CPWs. The advantage of plotting CPWs is that it is a normalized unit of work independent of the resources allocated to the server/LPAR. This means that the black diamonds on the graph represent the workload trend independent of the resources allocated to the server/LPAR.