Solaris Infrastructure Configuration Example - IBM Hub/Switch Installation Manual

<mkhpss> Status ==> Remove /opt/encinamirror/encina/sfs/hpss? (y/n)(y)
<mkhpss> Prompt ==> Remove /opt/encinalocal? (y/n)(y)
<mkhpss> Prompt ==> Remove /opt/encinamirror? (y/n)(y)
<mkhpss>
<hpss_dce_deregister> Status => Remove /.:/hpss? (y/n)(y)
<hpss_dce_deregister> Status => Removing keytab file, /krb5/hpss.keytabs.
<hpss_dce_deregister> Status => Removing keytab file, /krb5/hpssclient.keytab.
<hpss_dce_deregister> Status => Principals for hpss_server deleted
<hpss_dce_deregister> Status => Group, hpss_server and hpss_client, deleted
<hpss_dce_deregister> Status => DCE Deregister processing completed!
<mkhpss>
<mkhpss> Status ==> undo_init_setup processing completed!
[root@host:/opt/hpss/config]
E.3 Solaris Infrastructure Configuration Example
<mkhpss>
<mkhpss> Prompt ==>
<mkhpss>
<mkhpss>
<mkhpss>
<mkhpss>
<mkhpss>
<mkhpss>
<mkhpss>
<mkhpss>
<mkhpss>
<mkhpss>
<mkhpss> Reply ===> (Select Option [1-7, E, U, X]):1
<mkhpss>
<mkhpss>
HPSS Installation Guide
Release 4.5, Revision 2
Appendix E
Perform DCE Deregister
Perform Undo Init Setup
Infrastructure Configuration Menu
=================================
Select Infrastructure Configuration Option:
[1] Configure HPSS with DCE
[2] Configure SFS Server
[3] Create and Manage SFS Files
[4] Set Up FTP Daemon
[5] Set Up Startup Daemon
[6] Add SSM Administrative User
[7] Start SSM Servers/User Session
[E] Re-run hpss_env()
[U] Un-configure HPSS
[X] Exit
Perform DCE Set up
==================
Verify DCE is Running
=====================
September 2002
Infrastructure Configuration Example
511