Table of Contents
Advertisement
Chapter 6
HPSS Configuration
To add a new specific configuration, select the Migration/Purge Server entry and click on the Type-
specific... button from the Configuration button group on the HPSS Servers window. The
Migration/Purge Server Configuration window will be displayed as shown in Figure 6-26 with
default values. If the default data is not desired, change the fields with the desired values. Click on
the Add button to create the configuration entry.
To update an existing configuration, select the Migration/Purge Server entry on the HPSS Servers
window and click on the Type-specific... button from the Configuration button group. The
Migration/Purge Server Configuration window will be displayed with the configured data. After
modifying the configuration, click on the Update button to write the changes to the appropriate SFS
file.
To delete an existing configuration, select the Migration/Purge Server entry on the HPSS Servers
window and click on the Type-specific... button from the Configuration button group. The
Migration/Purge Server Configuration window will be displayed with the configured data. Click
on the Delete button to delete the specific configuration entry.
Refer to the window's help file for more information on the individual fields and buttons as well as
the supported operations available from the window.
Figure 6-26 Migration/Purge Server Configuration Window
342
September 2002
HPSS Installation Guide
Release 4.5, Revision 2
Advertisement
Table of Contents
