Table of Contents
Advertisement
Chapter 6
HPSS Configuration
Table 6-22 Migration/Purge Server Configuration Variables (Continued)
Display Field Name
Report File (Unix)
Checkpoint File
BFS API Failures
SS API Failures
344
Description
A prefix string used by the
MPS to construct a report
file name. The full file
name will consist of this
string with a date string
and subsystem Id
appended to it. This prefix
should include a full
UNIX path and file name.
If a full path is not
specified, the location of
the migration report files
may be unpredictable. A
new MPS report file is
started every 24 hours. If
the MPS reports are not
desired, leave this field
blank.
The name of the SFS file
where the migration /
purge checkpoint
information is stored.
For both disk and tape
migration, MPS allows a
consecutive number of
BFS API failures up to the
error limit configured in
this field. If the configured
number of consecutive
calls fail during a disk
migration run, MPS will
skip to the next hierarchy.
This number of
consecutive failures during
a tape migration run leads
MPS to abort the run.
For tape migration, MPS
allows a consecutive
number of SS API failures
up to the error limit
configured in this field.
This number of
consecutive failures leads
MPS to abort the run. This
field applies to tape
migration only.
September 2002
Acceptable Values
Blank
-or-
Any valid UNIX file name which is
writable by MPS.
Valid Encina file name.
Any positive number between 1 and
1000000 (one million)
Any positive number between 1 and
1000000 (one million)
HPSS Installation Guide
Release 4.5, Revision 2
Default
Value
blank - no
reports will be
generated.
/.:/encina/sfs/
hpss/
mpchkpt.#
3
3
Advertisement
Table of Contents
