Table of Contents
Advertisement
2.
Alternatively, it is possible to use a slightly different SMIT path to start the Cluster Manager
on the local node. Of course, this requires logging into each node independently to activate
both Cluster Managers.
% smitty hacmp
Cluster Services
Take the defaults and press <Enter>.
G.10.2 Shutdown the Cluster
The procedure for shutting the cluster down is almost exactly the same as starting the cluster.
The SMIT path that will let you shut down both nodes at once is:
% smitty hacmp
Cluster System Management
-> HACMP Cluster Services
This SMIT path that requires shutting down both nodes independently is:
HPSS Installation Guide
Release 4.5, Revision 2
Figure H-18 Starting Cluster Services
-> Start Cluster Services
-> Stop Cluster Services
September 2002
Appendix G
High Availability
571
Advertisement
Table of Contents
