Table of Contents
Advertisement
Chapter 6
HPSS Configuration
Display Field Name
Server Name
Server ID
Daemon Port
Log File Maximum Size
Record Count Notify Level
338
Table 6-20 Log Daemon Configuration Variables
Description
The descriptive name of
the Log Daemon. This
name is extracted over
from the Log Daemon
general configuration
entry.
The UUID of the Log
Daemon. This ID is copied
over from the Log
Daemon general
configuration entry.
The port number for
communication between
the Log Client and the Log
Daemon.
Advice: Ensure that the port number assigned does not conflict with any other
executing application. The port value must be a different value than the port number
in the Log Client configuration entries.
The maximum size in
bytes of the central log
file. Once this size is
reached, logging will
switch to a second log file.
The log file that filled up
will then be archived to an
HPSS file if the Archive
Flag is on.
Note: Since two log files are allocated to accommodate log switching and log file
archiving, the amount of space used by logging will be twice the specified value.
The difference in the log
record count since the
previous SSM notification
that must be reached to
trigger a subsequent
notification to SSM when
any registered log file
attribute changes.
Advice: Since log file attributes change each time a log record is written (e.g.,
current log record), this variable is used to prevent transmission of excessive
messages to SSM as a result of logging activity. Setting the variable to a small value
will result in increased traffic to SSM.
September 2002
Acceptable Values
This field cannot be modified. It is
displayed for reference only.
The UUID of the Log Daemon.
This field cannot be modified. It is
displayed for reference only.
Any positive 32-bit integer value
not previously assigned.
A positive integer up to the
maximum file size allowed by the
operating system.
Any positive 32-bit integer value.
HPSS Installation Guide
Release 4.5, Revision 2
Default
Value
The selected
Log Daemon
descriptive
name.
Extracted
from the Log
Daemon
general
configuration
entry.
8100
5,242,880
50
Advertisement
Table of Contents
