Table of Contents
Advertisement
Table 6-5 Purge Policy Configuration Variables (Continued)
Display Field Name
Purge Locks expire after
Storage Subsystem
6.6.3
Configure the Accounting Policy
The accounting policy defines how each HPSS user account will be charged for using HPSS
resources. Refer to Section 2.8.3 for more information on setting and using the Accounting Policy.
An accounting policy can be created using the Accounting Policy window. After the configuration
entry is created, it can be viewed, updated, or deleted through the same window.
From the HPSS Health and Status window (shown in Figure 6-1), click on the Admin menu, select
the Configure HPSS option and click on the Accounting Policy option.
The Accounting Policy window will be displayed as shown in Figure 6-9. Since only one
Accounting Policy can be configured, the fields are displayed with default values for a new policy
if one does not exist. Otherwise the fields will be displayed with data from the configured policy.
To add a new policy, change the default fields with the desired values and click on the Add button
to create the configuration entry.
To update an existing policy, modify the policy data and click on the Update button to write the
changes to the SFS file.
To delete the existing policy, click on the Delete button to delete the policy.
Refer to the window's help file for more information on the individual fields and buttons as well as
the supported operations available from the window.
HPSS Installation Guide
Release 4.5, Revision 2
Description
Maximum number of
minutes that a file may
hold a purge lock. Purge
locked files are not eligible
for purging.
The descriptive name of
the storage subsystem to
which a subsystem-
specific policy applies.
This field is filled in with
the selected storage
subsystem name at the
time a subsystem specific
policy is created and may
not be changed
afterwards.
September 2002
Chapter 6
Acceptable Values
Any integer value between 0 and
1000000 (one million). A value of 0
indicates that purge locks expire
immediately.
The descriptive name of any
existing storage subsystem.
HPSS Configuration
Default
Value
0
None
289
Advertisement
Table of Contents
