Miscellaneous Rules For Backing Up Hpss Metadata - IBM Hub/Switch Installation Manual

High performance storage system release 4.5
Table of Contents

Advertisement

Chapter 2
HPSS Planning
The file system used to store TRB (i.e., data volume backup) files must be mirrored on at
least two separate physical disks or be stored on a redundant RAID device.
Separate disks must be used to store the SFS data volumes versus the file system used to
store TRB files.
Separate disks must be used to store the SFS log volume versus the SFS data volumes.
A sufficient number of TRB files must be generated such that a complete backup of each
SFS data volume is made at least every 5 days (recommend using a TRB file size such that
it takes no more than 20 files to cover the entire data volume).
TRB files must be copied to tape as soon as they are generated.
TRB files must be copied to at least two different tapes.
A complete set of TRB files must be generated (i.e., a complete SFS data volume backup)
prior to running HPSS in production mode.
A data dump (dd) of all SFS log and data volumes should be made at least once per month
while HPSS and SFS are not running and should be copied to at least two different tapes.

2.12.3 Miscellaneous Rules for Backing Up HPSS Metadata

Once a month, a site must tell SFS to truncate old backups and retain backup information
for at least the latest 10 complete backups.
At least one image of the tape backups must be moved offsite at a frequency that meets the
site's disaster recovery objectives. For example, if a site always wants to be able to recover
to the previous day in case of a disaster, then tapes must be moved offsite each day.
The Encina SFS configuration information must be backed up to at least two separate tapes
after SFS is initially configured and immediately after the SFS configuration changes (i.e.,
a data volume is added, deleted, or expanded). It must also be backed up at least once per
week.
The DCE servers information (e.g., the security registry and CDS name space) must be
backed up to at least two separate tapes immediately after HPSS is configured and then at
least once per week.
If configured, the HPSS PFTP configuration files must be backed up at least once per week.
If configured, the HPSS NFS configuration files must be backed up at least once per week.
HPSS must not be used to read/write tapes used to store backup files (Encina, DCE, etc.).
144
September 2002
HPSS Installation Guide
Release 4.5, Revision 2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hpss

Table of Contents