IBM Hub/Switch Installation Manual page 133

High performance storage system release 4.5
Table of Contents

Advertisement

2.10.3.2.1
Disk Space Requirements for Core files and Encina Trace Buffers
The /var/hpss/adm/core is the default directory where HPSS creates core and Encina trace files
resulting from subsystem error conditions. The actual size of the files differ depending on the
subsystems involved, but it is recommended that there should be at least 512 MB reserved for this
purpose on the core server node and at least 256 MB on Mover nodes. This directory should also be
analyzed periodically to remove any old core files or Encina trace buffers.
2.10.3.2.2
Disk Space Requirements for HPSS Files
The /var/hpss/etc is the default directory where some of the additional Unix configuration files are
placed. These files are typically very small.
The /var/hpss/tmp is the default directory where the Startup Daemon creates a lock file for each of
the HPSS servers it brought up in the node. These lock files are typically very small.
2.10.3.2.3
Disk Space Requirements for Running Log Daemon
The Log Daemon will create two central log files in the directory specified in its configuration,
usually /var/hpss. The size of these log files are also specified in its configuration, usually 5
megabytes each.
2.10.3.2.4
Disk Space Requirements for Running Log Client
Each Log Client will create one local log file in the directory specified in its configuration, usually /
var/hpss. The size of the local log file is also specified in its configuration, usually 5 megabytes.
2.10.3.2.5
Disk Space Requirements for Running MPS
If the migration/purge report is configured, the MPS will generate a migration/purge report every
24 hours. The size of these reports varies depending on the number of files being migrated/purge
during the report cycle. These reports should be configured to be written into the /var/hpss/mps
directory and should be removed when no longer needed.
2.10.3.2.6
Disk Space Requirements for Running GK
If the Gatekeeper Server is configured to do Gatekeeping Services, then the site may wish to create
a site policy configuration file specified in the Gatekeeper Server configuration record, usually /var/
hpss/gk/gksitepolicy. The size of this file depends on the site-implemented gatekeeping policy.
2.10.3.2.7
Disk Space Requirements for Running an Accounting Report
If an Accounting report is requested, a report file and a checkpoint file are created in the directory
specified in the Accounting Policy, usually /var/hpss/acct. The sizes of these files depend upon the
number of files stored in HPSS.
HPSS Installation Guide
Release 4.5, Revision 2
September 2002
Chapter 2
HPSS Planning
133

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hpss

Table of Contents