Table of Contents
Advertisement
Appendix E
Infrastructure Configuration Example
<mkhpss> Status ==> Adding {user encina_admin ACQ} ...
<mkhpss> Status ==> Adding {user hosts/host.clearlake.ibm.com/self ACQ} ...
<mkhpss> Status ==> Clearing exclusive authority ...
<mkhpss> Status ==> Stopping server ...
<mkhpss> Status ==> Destroying credentials ...
<mkhpss> Status ==> Preparing the SFS server for a warm start ...
<mkhpss> Status ==> Collating language to use (en_US):
<mkhpss> Status ==> Buffer pool size <kilobytes> to use (8192):
<mkhpss> Status ==> Idle timeout <seconds> to use (60):
<mkhpss> Status ==> Checkpoint interval <seconds> to use (60):
<mkhpss> Status ==> Checkpoint interval <min_records> to use (5000):
<mkhpss> Status ==> Checkpoint interval <max_records> to use (100000):
<mkhpss> Status ==> Thread pool <user> size to use (400):
<mkhpss> Status ==> Thread pool <emergency> size to use (20):
<mkhpss> Prompt ==> Do you want rc.encina to be invoked at system restart? (y/n)(y)
<mkhpss> Status ==> SFS configuration complete! ...
<mkhpss> Status ==> Configure HPSS with Encina completed, continue...
<mkhpss>
<mkhpss> Prompt ==>
<mkhpss>
<mkhpss>
<mkhpss>
<mkhpss>
<mkhpss>
<mkhpss>
<mkhpss>
<mkhpss>
<mkhpss>
<mkhpss>
<mkhpss> Reply ===> (Select Option [1-7, E, U, X]):3
<mkhpss>
<mkhpss>
<mkhpss> Status ==> DCE is running, continue...
<mkhpss> Prompt ==> Password for encina_admin:
Reading /opt/hpss/config/hpss_env
516
Infrastructure Configuration Menu
=================================
Select Infrastructure Configuration Option:
[1] Configure HPSS with DCE
[2] Configure SFS Server
[3] Create and Manage SFS Files
[4] Set Up FTP Daemon
[5] Set Up Startup Daemon
[6] Add SSM Administrative User
[7] Start SSM Servers/User Session
[E] Re-run hpss_env()
[U] Un-configure HPSS
[X] Exit
Perform Manage SFS
==================
Verify DCE is Running
=====================
September 2002
HPSS Installation Guide
Release 4.5, Revision 2
Advertisement
Table of Contents
