Output Application; Transmission Of Any Portion Of This Document. This Document May Only Be Viewed Electronically Through The Www.bertl.com Web Site And May Not Be Stored In Electronic; Or Hard Copy Format. Any Reproduction Of Trademarks Is Strictly Prohibited. Bertl Accepts No Responsibility For Any Inaccuracies Or Omissions Contained In This Document - Oce VarioPrint 1105 Review Manual

Océ VarioPrint 1105
Copy

Output Application

Under this menu the operator has access to
the wide range of document finishing
features of the device.
There are three sub-menus. A basic staple
menu where operators can quickly add a
staple to a job. The same quick access icon
for hole punching. However, for the more
advanced finishing needs
such as folding, booklet
production etc the operator
has to go into the Output
Application sub menu. (See
image at bottom of page).
From here, users are able
to choose from the multiple
folding options, booklet
production, customize
stapling or hole punch
requirements and more.
Operators can choose the
binding direction, output
face up or down orientation
and output order for the job.
Copyright © 2008 BERTL Inc. All Rights Reserved. The license under which this document is made available and applicable law prohibit any reproduction or further

transmission of any portion of this document. This document may only be viewed electronically through the www.BERTL.com Web site and may not be stored in electronic

or hard copy format. Any reproduction of trademarks is strictly prohibited. BERTL accepts no responsibility for any inaccuracies or omissions contained in this document.

Above: Folding options
Below: Full range of output finishing options
March 2008