Oce VarioPrint 1105 Review Manual page 15

Océ VarioPrint 1105
Device Management
Under the job tab, users
can view the jobs
currently in the queue and
those already completed.
We were pleased to see
that the feature displayed
both copy and print jobs
and included an estimate
of the time before the job
in progress would be
completed. This is a
valuable function that
would allow a remote
user to view the device
activity without having to
visit the device. This
allows operators to:
1. Check that the device
has enough work to keep it productive
while the operator attends to other
aspects of the CRD/print room,
2. See when important jobs have been
completed, and
3. Allow operators to quickly assess how
quickly a print job could be
accomplished on the device without
disrupting the current
workflow.
Administrators have
access to two additional
tabs:
1. Scan
2. Network
The scan tab provides
administrators with the
ability to set up the
default subject line and
message that are sent
when a scan to email is
sent from the device.
Copyright © 2008 BERTL Inc. All Rights Reserved. The license under which this document is made available and applicable law prohibit any reproduction or further
transmission of any portion of this document. This document may only be viewed electronically through the www.BERTL.com Web site and may not be stored in electronic
or hard copy format. Any reproduction of trademarks is strictly prohibited. BERTL accepts no responsibility for any inaccuracies or omissions contained in this document.
March 2008