Pagescope Jobspooler - Oce VarioPrint 1105 Review Manual

Océ VarioPrint 1105
Device Management

PageScope JobSpooler

PageScope JobSpooler is a software utility
encompassing server and client software
applications that allows operators to view
and re-prioritize print jobs in the queue.
Once installed onto the host PC, JobSpooler
is activated via a standard internet browser
by first logging into the server application,
which is located within http://localhost:9070/.
The user is then presented with a login
username and password before access to
the utility is granted.
JobSpooler can be used to monitor and
manage the queues of multiple devices
around the CRD/print shop. The status of
each device is indicated, allowing the user to
choose the required device.
Copyright © 2008 BERTL Inc. All Rights Reserved. The license under which this document is made available and applicable law prohibit any reproduction or further
transmission of any portion of this document. This document may only be viewed electronically through the www.BERTL.com Web site and may not be stored in electronic
or hard copy format. Any reproduction of trademarks is strictly prohibited. BERTL accepts no responsibility for any inaccuracies or omissions contained in this document.
The operator now has three tabs:
1. Job
2. System
3. PSWC (PageScope Web Connection)
Within the job tab, operators have three sub
menus; active job, box and completed job.
Within the active job menu, operators can
view the current print queue, push print jobs
up the list (in single priority increments or
jump the entire queue in a single step) or
cancel jobs altogether. While more basic
than the print queue management system
offered by some competing units it did serve
the purpose.
March 2008