Table of Contents
Advertisement
7.1.3 Delete all
Use this menu to delete all stored channels. Select Delete All with
you to enter the pin code. (DEfaUlT PIN: 1234). Inside the confirmation window select Yes with
press Ok to delete or select No to cancel.
Warning:
The Delete all function will permanently delete all current channels and all favourite
lists from your receiver, and you are not able to leave the menu until you search for
channels again.
7.1.4 Rename favourite list
This menu allows you to personalize the names of the 8 available favourite lists.
to select Rename Favourite List from the Edit Channel Menu and press Ok to proceed. The names
Use
pq
of all groups are now displayed. Select a favourite group with
field will now pop up at the right of the screen. Use
When you have finished editing, press blUE to save the changes. When all changes have been made,
press EXIT twice to leave this menu.
7.2 Installation
7.2.1 auto Scan
to select Installation and press Ok or
Use
pq
Select Auto Scan with
Use
to toggle between Yes or No. When FTA Only is set to Yes, scrambled channels won't be stored in
tu
the channel list. Use
pq
The receiver will store all found channels in the channel list.
7.2.2 Channel Scan
to select Installation, press Ok or
Use
pq
to select Channel Scan and press Ok to enter.
Use
pq
Use
to toggle between available scan modes: By Channel and By Frequency.
tu
If By Channel is selected, use the cursor buttons to select Scan Band and Channel No. If By Frequency is
selected, use the cursor buttons to select Frequency and Bandwidth. Highlight Search and press Ok to
start scanning. Newly found channels will be added to the channel list.
7.2.3 antenna Power
to select Installation, press Ok or
Use
pq
to select Antenna Power and press Ok to enter.
Use
pq
Set to On if you use an active antenna.
Select Off for passive antennas.
When set to On, 5 V will be present on the ANT IN connector of the receiver.
Press EXIT to leave the Antenna Power menu.
7.2.4 lCN (logical Channel Numbering)
If LCN (Logical Channel Numbering) is activated and an LCN signal is provided by the operator,
channels will be stored in an operator defined order. Set LCN to On to activate operator defined channel
numbering or Off to store channels in found order. This function only applies when a new channel
search is performed.
7.3 System Setup
This menu allows you to manage the system settings of your receiver. It consists of the following
sub-menus: Language, TV System, Local Time Setting, Timer Setting, Parental Lock, OSD Setting and Auto
Standby.
10
and press Ok to enter.
pq
to highlight Search. Now press Ok to start auto scan.
u
u
pq
to select characters and enter them with Ok.
tu pq
to advance.
u
to advance.
to advance.
and press Ok. The receiver asks
pq
and press Ok to edit its name. A text
PaRT 1 • English
and
tu
Advertisement
Table of Contents
