System Setup - Strong SRT 8205 User Manual

NOTE:
7.2.4 LCN (Logical Channel Numbering)
If LCN (Logical Channel Numbering) is activated and an LCN signal is provided by the operator,
channels will be stored in an operator de ned order.
Set LCN to On to activate operator de ned channel numbering or O to store channels in found
order.
This function only applies when a new channel search is performed.

7.3 System Setup

This menu allows you to manage the system settings of your receiver.
It consists of the following sub-menus: Language, TV System, Local Time Setting, Timer Setting, Parental
Lock, OSD Setting and Auto Standby.
7.3.1 Language
This menu allows you to set up your language preferences.
Language:
First Audio:
Second Audio:
Subtitle Language:
2nd Subtitle Language: Use   to select the preferred 2nd subtitle language if the 1st preference is
Teletext:
Subtitle:
* Availability of DVB/HoH subtitles depends on the broadcast. If subtitles are not supported, they can be activated via Teletext if available.
7.3.2 TV System
Use this menu to match your receiver to your TV set.
The following settings are available:
Video Resolution:
Aspect Mode:
16
Before connecting your antenna to the receiver, please read the user
manual of the antenna regarding antenna powering. This parameter is
recommended to set to On only for active internal or external antennas
which require power supply via antenna cable with voltage of 5 V DC and
consume less than 50 mA. Otherwise, leave it O .
Use   to select the language for the On Screen Display.
Use   to select Audio language.
Use   to select a language that will be played when the language selected
at First Audio isn't available.
Use   to select the preferred subtitle language.
not available.
Use   to select the preferred Teletext language (when available).
Use   to select the preferred subtitle type to be displayed automatically.
Select Normal], {Hard of Hearing or O *
Use this option to select the video resolution of your TV screen. The options
are: By Source (automatic detection of video resolution o ered to the
receiver), By Native TV (automatic detection of maximal resolution of TV
screen), and manual selections 480i, 576i up to 1080p. Please use a setting that
matches the speci cations of your TV. After a selection is made, you will be
asked to con rm. Selection above 576i is only applicable on HDMI output.
Use this option to select the aspect ratio of your TV and the preferred
conversion method. The options are: Auto - automatic detection of aspect