System Setup - Strong SRT 8202 User Manual

noTE
7.2.4 LCn (Logical Channel numbering)
If LCN (Logical Channel Numbering) is activated and an LCN signal is provided by the operator,
channels will be stored in an operator defined order. Set LCN to On to activate operator defined
channel numbering or Off to store channels in found order. This function only applies when a new
channel search is performed.

7.3 System Setup

This menu allows you to manage the system settings of your receiver. It consists of the following
sub-menus: Language, TV System, Local Time Setting, Timer Setting, Parental Lock, OSD Setting, Audio
Description Setting and Auto Standby.
Press pq to highlight the menu of choice and press ok advance to the next screen. Use pq to
move the highlight to the setting of choice. Values can be changed with tu. Press EXIT to leave.
7.3.1 Language
This menu allows you to set up your language preferences.
Language:
First Audio:
Second Audio:
Subtitle Language:
2nd Subtitle Language: Use tu to select the preferred 2nd subtitle language if the 1st preference is
Teletext:
Subtitle:
* Availability of DVB/HoH subtitles depends on the broadcast. If subtitles are not supported, they can be activated via
Teletext if available.
7.3.2 Tv System
Use this menu to match your receiver to your TV set. The following settings are available:
Video Resolution:
Before connecting your antenna to the receiver, please read the user
manual of the antenna regarding antenna powering. This parameter is
recommended to set to On only for active internal or external antennas
which require power supply via antenna cable with voltage of 5 V DC and
consume less than 50 mA. Otherwise, leave it Off.
Use tu to select the language for the On Screen Display.
Use tu to select Audio language.
Use tu to select a language that will be played when the language selected
at First Audio isn't available.
Use tu to select the preferred subtitle language.
not available.
Use tu to select the preferred Teletext language (when available).
Use tu to select the preferred subtitle type to be displayed automatically.
Select Normal, Hard of Hearing or Off*
Use this option to select the video resolution of your TV screen. The options
are: By Source (automatic detection of video resolution offered to the
receiver), By Native TV (automatic detection of maximal resolution of TV
screen), and manual selections 480i, 576i up to 1080p. Please use a setting that
matches the specifications of your TV. After a selection is made, you will be
asked to confirm. Selection above 576i is only applicable on HDMI output.
15