Table of Contents
Advertisement
7.2.2 Radio Channel List manager
Create favourite lists, move channels in order, lock channels with PIN protection and delete channels
from the radio list. The functions of handling are the same as in the TV Channel List as described
above. The only difference is that in the Radio manager there is no video information, so it will always
display the radio background on the preview screen.
7.3 System Setup
Use p q to select System Setup in the main menu. Use p q to highlight the submenu of choice and
press OK to select.
7.3.1 Language
This menu allows you to set up your language preferences.
OSD Language:
1st Audio language:
2nd Audio language:
Teletext:
7.3.2 Tv System
Use this menu to match your receiver to your TV set and/or home cinema set.
The following settings are available:
Video Resolution:
Aspect Ratio:
HDMI/ Digital Audio Output:
*Dolby Digital Plus, Dolby Digital and the double-D symbol are registered trademarks of Dolby
Laboratories
7.3.3 Display Settings
This menu allows to change Brightness, Contrast, Saturation, Hue and Sharpness for video display on
you TV screen.
7.3.4 Time Settings
Here you can set up your time zone for clock/time in your menu and system.
Use p q to move the highlight to the setting of choice. Values can be changed with t u. Press
to leave.
Use t u to select the language for the On Screen Display.
Use t u to select the audio language you like to hear as first priority, if
available.
Use t u to select a language that will be played when the language selected
at 1st Audio language isn't available.
Select the language for local used language to support correctly the use
character types in Teletext.
Select the video resolution of your TV screen. The options are: selections 480i
up to 1080p Please use a setting that matches the specifications of your TV.
Selection above 576i is only applicable to the HDMI output.
Select the aspect ratio of your TV. The options are: 4:3 for 4:3 screen and
16:9 for 16:9 TV sets. Select Auto for automatic detection if TV support this
function.
Toggles between PCM and RAW output. When PCM is selected, all digital
audio will be converted to stereo audio. RAW enables you to listen or transfer
Dolby® Digital/Dolby® Digital Plus* audio to the TV via HDMI to a home
cinema set.
13
Advertisement
Table of Contents
