Installation; System Setup - Strong PRIMA VI User Manual

7.2 Installation

7.2.1 Auto scan
Use pq to select Installation and press ok or u to advance.
Select Auto Scan with pq and press ok to enter.
Use tu to toggle between Yes or No. When FTA Only is set to Yes, scrambled channels won't be
stored in the channel list. Use pq to highlight Search. Now press ok to start auto scan.
The receiver will store all found channels in the channel list.
7.2.2 Channel scan
Use pq to select Installation, press ok or u to advance.
Use pq to select Channel Scan and press ok to enter.
Use tu to toggle between available scan modes: By Channel and By Frequency.
If By Channel is selected, use the cursor buttons to select Scan Band and Channel No. If By Frequency
is selected, use the cursor buttons to select Frequency and Bandwidth. Highlight Search and press ok
to start scanning. Newly found channels will be added to the channel list.
7.2.3 Antenna Power
Use pq to select Installation, press ok or u to advance.
Use pq to select Antenna Power and press ok to enter.
Set to On if you use an active antenna.
Select Off for passive antennas.
When set to On, 5 V will be present on the ANT IN connector of the receiver.
Press EXIT to leave the Antenna Power menu.
7.2.4 lCn (logical Channel numbering)
If LCN (Logical Channel Numbering) is activated and an LCN signal is provided by the operator,
channels will be stored in an operator defined order. Set LCN to On to activate operator defined
channel numbering or Off to store channels in found order. This function only applies when a new
channel search is performed.

7.3 system setup

This menu allows you to manage the system settings of your receiver. It consists of the following
sub-menus: Language, TV System, Local Time Setting, Timer Setting, Parental Lock, OSD Setting and
Auto Standby.
Press pq to highlight the menu of choice and press ok advance to the next screen. Use pq to
move the highlight to the setting of choice. Values can be changed with tu. Press EXIT to leave.
7.3.1 language
This menu allows you to set up your language preferences.
Language:
First Audio:
Second Audio:
12
Use tu to select the language for the On Screen Display.
Use tu to select Audio language.
Use tu to select a language that will be played when the language selected
at First Audio isn't available.
PART 1 • English