Attaching The Supports - Brother MFC-8220 Service Manual

CHAPTER 2 INSTALLATION AND BASIC OPERATION
3.1.1

Attaching the Supports

NOTE:
Do not connect the interface cable. Connecting the interface cable is done when installing the
driver.
(1) Attach the ADF document support.
(2) Open the control panel cover by lifting it toward the back.
(3) Attach the ADF support.
(4) Close the control panel cover.
ADF document support
Fig. 2-2
Control panel cover
Fig. 2-3
ADF document output support
Fig. 2-4
2-6