Brother MFC-8220 Service Manual page 136

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
(29) Remove the chute cover.
(30) Remove the regist front actuator and regist front actuator spring.
(31) Remove the regist rear actuator and regist rear actuator spring.
NOTE:
When assembling the regist front actuator and the regist rear actuator, set the spring as
shown in the figure.
Hook
Regist front actuator spring
Regist rear actuator
Regist rear actuator spring
Regist rear actuator spring
Hole
Hole
Chute cover
Hook
Fig. 4-105
Fig. 4-106
Regist rear actuator
Regist front actuator spring
Fig. 4-107
4-58
Regist front actuator
Regist front actuator