For Usb Interface Cable Users (For Mac Osx 10.1/10.2.1 Or Greater Users) - Brother MFC-8220 Service Manual

3.2.6 For USB Interface Cable Users (For Mac OS
(1) Turn off and unplug the machine from the AC outlet and disconnect it from your
Macintosh
(2) Turn on your Macintosh
(3) Insert the supplied CD-ROM for Macintosh
(4) Double-click the Start Here OSX icon to install the printer driver, Scanner driver, Brother
PC-FAX Send and Remote Setup program. If the language screen appears, select your
language. (Scanning is not supported in Mac OS
(5) Click Install next to the MFL-Pro Suite.
(6) Select USB Interface, and then click Install.
(7) Connect the USB interface cable to your Macintosh
Caution
Do not connect the machine to a USB port on a keyboard or a non powered USB hub.
(8) Plug the machine into the AC power outlet. Turn the power switch on.
(9) Select Applications from the Go menu.
(10) Open the Utilities folder.
(11) Open the Printer Center icon.
(12) Click Add Printer....
(13) Select USB.
(14) Select your machine, and then click Add.
(15) Select Quit Printer Center from the Printer Center menu.
OK:
The Brother Printer driver, Scanner driver, Brother PC-FAX Send and Remote Setup
Program have been installed and the installation is now complete.
(16) To install Presto!
and follow on the Screen instructions.
NOTE:
You can easily scan, share and organize photos and documents using Presto!
PageManager
OK:
®
Presto! PageManager
®
if you already connected an interface cable.
®
.
® ®
PageManager
®
.
®
has been installed and the installation is now complete.
®
X 10.1/10.2.1 or greater Users)
®
into your CD-ROM drive.
®
10.1.)
®
, and then connect it to the machine.
, click Install next to the Presto! PageManager icon
2-29
MFC-8220
SERVICE MANUAL
®